Our starting prices
Prices below are starting prices + GST. Your written quote confirms the work, any additional costs and the amount payable before you book.
| Repair | Starting price + GST | Scope notes |
|---|---|---|
| Standard chip repair | From $390 + GST | Additional chips and material are quoted separately. |
| Additional small chip | $100 + GST | Additional to the agreed standard chip repair. |
| Additional large chip | $150 + GST | Size and complexity confirmed in the scope. |
| Porcelain chip surcharge | $100 + GST per chip | Additional to repair pricing; a visible result remains. |
| Joint repair | From $550 + GST | Additional joints typically $150–$200 + GST each. |
| Crack repair | From $790 + GST | Visible resin repair. Support or replacement may be needed. |
| Dropped undermount sink removal & re-fit | From $790 + GST | Existing sink removal, preparation and reinstallation with suitable bonding and support. No new sink supply; plumbing and additional work separate unless agreed. |
| Cooktop or sink cut | From $690 + GST per cut | Material and access confirmed; fittings and connections separate. |
| Freestanding oven cutout | $990 + GST | Larger opening for a freestanding oven or cooker; scope confirmed before booking. |
| Tap-hole drilling | From $390 + GST | Location, material and access confirmed. |
| Standard overhang reduction / back flush & polish | From $1,490 + GST | Dimensions, material and finishing scope confirmed. |
| Small engineered-stone stain or burn treatment | From $690 + GST | Full-section film is additional and separately quoted. |
| Whole-section straight cut & removal | From $990 + GST | Defined straight-cut section removal; lengthwise edge reduction and polishing are a separate $1,490 + GST scope. |
Prices you can see. Work you can understand.
Publishing our starting prices gives you a useful budget before you contact us. Our price reflects the preparation, materials, colour matching and finishing needed for the agreed repair. We explain what is included and any appearance limits, then confirm the scope in writing. You can compare the work as well as the number.
Freestanding oven cutout - $990 + GST
Freestanding oven cutouts are $990 + GST. The larger opening requires more stone cutting than a standard cooktop cutout. Send the appliance installation drawing and photos so we can confirm the scope before booking.
A useful starting point
Standard chip repair starts from $390 + GST. Additional small chips may add $100 + GST and larger chips $150 + GST. Joint repair starts from $550 + GST, with additional joints typically $150–$200 + GST each. Crack repairs start from $790 + GST and remain visible.
Material-specific costs
Porcelain has an additional $100 + GST per chip and a visible-result limitation. Suitable small engineered-stone stain or burn surface treatment starts from $690 + GST; full-section protection film is additional and quoted for the actual coverage. Sanding does not recreate the engineered-stone factory sheen.
Cutting and related work
Standard cooktop or sink cutting starts from $690 + GST per cut. Tap-hole drilling starts from $350 + GST for the first hole; each additional hole at the same visit is $100 + GST. The material, access, finishing and fitting details are assessed through the cutting scope. Appliance connection and plumbing are separate unless explicitly included.
Dropped undermount sink removal & re-fit
The starting price covers standard removal, preparation and reinstallation of the existing undermount sink with suitable bonding and support. Final cost depends on access, the bowl and mounting condition, previous attempts to repair it, cabinet clearance and any additional support required. New sink supply, plumbing disconnection or reconnection, stone cutting, chip or crack repairs and cabinet alterations are separate unless expressly included. Your written quote confirms the work and amount payable before booking.
Your final quote
Travel, restricted access, larger damaged areas, previous repairs and additional support can affect the price. Send the full scope and address so the written quote identifies what is included. Unlisted restoration and protection work is individually assessed rather than assigned a one-size-fits-all price.
Straight section removal or lengthwise edge reduction?
A whole-section straight cut and removal starts at $990 + GST. Cutting down an edge along the length of the bench and polishing it, for example changing a 900 mm depth to 800 mm, starts at $1,490 + GST. Cooktop and sink cutouts remain from $690 + GST per cut; tap holes remain from $350 + GST for the first hole; each additional hole at the same visit is $100 + GST. Confirm the exact section, dimensions, material and finishing in the written quote.
Questions, answered.
Why do you publish your prices?
We believe customers should have a useful starting budget and understand the work behind the price. We are confident in our workmanship and explain the repair scope before booking.
Is the starting price my final quote?
The starting price applies to the stated standard scope. Material, additional damage, access, travel and separate work can affect the final price. Your written quotation confirms the complete scope and total before booking.
What if I have a cheaper quote?
Compare the same damage, preparation, materials, finished profile, appearance limits and aftercare. A lower price can reflect a different scope or operating costs; it does not prove poor workmanship. Ask what is included and decide on the complete proposal.
How is GST shown?
Published starting prices are shown as + GST. Your written quotation confirms the agreed work, GST and the amount payable before booking.